Engineered cold-rolled grain-oriented silicon steel grades developed specifically for high-frequency induction, lower excitation currents, and heavy-duty power accessory architectures.
The global transition to smart energy grids and high-efficiency power networks demands specialized electromagnetic alloys that suppress hysteresis losses and withstand intense magnetic saturation.
In the contemporary electrical utility and transmission landscape, oriented steel for power accessories has emerged from a conventional niche into a pivotal strategic asset. As renewable energy generation from offshore wind farms, expansive photovoltaic fields, and modern nuclear installations joins the high-voltage transmission grid, electrical equipment faces unprecedented cyclic stresses, harmonic distortions, and stringent efficiency benchmarks. Power accessories—spanning precision current and potential transformers (CT/PT), bushing assemblies, inductive reactors, magnetic shunts, step-lap joint laminations, and high-voltage switchgear magnetic actuators—constitute the sensory and protective backbone of the entire grid infrastructure. Without ultra-low-loss core materials, these critical accessories suffer thermal instability, metering inaccuracy, and premature insulation aging.
Optimized Goss texture (110)[001] crystal alignment drastically mitigates eddy currents and anomalous domain wall losses, enabling high-voltage accessories to operate at peak operational efficiency without thermal bottlenecks.
High magnetic induction (Hi-B) compositions guarantee high magnetic permeability under intense field excitation, dramatically reducing magnetizing current in instrument transformers and protective relays.
Minimizing magnetostrictive strain (λ17/50) eliminates structural hum and acoustic resonance within substation environments, safeguarding delicate power accessories against continuous vibration fatigue.
Historically, generic non-oriented or entry-grade electrical sheets were frequently utilized in secondary accessories to economize production expenses. However, the international enforcement of stringent efficiency mandates (such as the EU EcoDesign Tier 2 directive, U.S. DOE 2016 conservation standards, and China's GB 20052 Level-1 efficiency criteria) has fundamentally rewritten accessory design requirements. Today, power grid operators evaluate lifetime operational expenditure over upfront acquisition costs. A reduction of mere milliwatts per kilogram within current transformers or reactor magnetic bypass shields aggregates into megawatts of saved energy across regional transmission corridors.
Furthermore, the physical footprint of modern urban substations, compact modular switchgear (GIS/C-GIS), and offshore wind nacelles is severely constrained. Power apparatus designers must deliver maximum flux throughput within smaller, lighter physical enclosures. Cold-rolled grain-oriented silicon steel (CRGO) with superior magnetic induction allows engineers to run cores at operational saturation limits up to 1.7T or even 1.8T without inducing excessive excitation volt-amperes, unlocking compact geometric topologies for power accessories that were previously unattainable.
From micro-metering precision instrument transformers to massive megawatt transformer magnetic shielding shields, grain-oriented silicon steel serves as the foundational electromagnetic core.
Current and voltage transformers require razor-sharp linear response curves across widely fluctuating primary loads. Shouyu Hi-B oriented steel provides exceptionally high initial and maximum permeability with negligible phase angle error, ensuring revenue-grade metering accuracy (0.2S and 0.1 class) and instantaneous protective relay tripping under catastrophic short-circuit conditions.
Installed over high-voltage condenser bushings inside power transformers and oil-immersed circuit breakers, BCT cores operate in elevated thermal environments immersed in dielectric fluid. Our laser-scribed oriented grades feature highly stable inorganic insulating coatings that resist oil degradation and maintain unyielding magnetic performance under steep thermal gradients.
In large-capacity generator step-up (GSU) and auto-transformers, leakage magnetic fields generate localized eddy hot-spots in structural steel tanks and clamping structures. Grain-oriented steel shunts capture and channel stray flux along the low-reluctance rolling direction, neutralizing hot-spot overheating and preventing structural oil degradation.
High-voltage DC (HVDC) converter stations and harmonic filter banks utilize specialized gapped reactors subjected to multi-frequency harmonics. Shouyu low-iron-loss silicon steel mitigates high-frequency core heating, preventing thermal runaway and extending the lifespan of inter-turn insulation in grid-tied power quality equipment.
Fast-acting vacuum circuit breakers and reclosers rely on bistable permanent magnet actuators. Oriented electrical steel cores deliver extreme dynamic holding force and split-second flux switching, ensuring sub-cycle mechanical trip times to isolate downstream transmission faults and protect substation hardware.
Auxiliary auxiliary service transformers, ground fault neutralizer coils (Petersen coils), and step-lap core clampings benefit from the extreme uniformity and mechanical flatness of cold-rolled oriented strip, preventing mechanical chatter, delamination, and parasitic inter-laminar shorts under severe short-circuit electromagnetic stresses.
Continuously pushing the thermodynamic boundaries of grain growth kinetics, laser magnetic domain refinement, and ultra-thin strip rolling.
The core frontier in oriented silicon steel for power accessories centers on active magnetic domain engineering. By directing localized, high-energy Nd:YAG laser pulses perpendicular to the rolling direction, the wide 180° magnetic domain walls are refined into narrower, tightly spaced sub-domains. This non-destructive thermal scribing process reduces dynamic eddy current loss by an astonishing 15% to 22%. In precision accessories like zero-sequence current transformers, laser-refined Hi-B steel ensures that faint residual currents are captured with surgical precision without noise floor interference.
While standard grid distribution traditionally utilized 0.27mm and 0.30mm strip gauges, the integration of solid-state transformers (SST), flexible AC transmission systems (FACTS), and fast EV charging hubs operating at kilohertz frequencies requires ultra-thin oriented steel gauges. Industrial cold-rolling mills can now consistently achieve 0.20mm, 0.23mm, and 0.18mm specifications with strict dimensional tolerance control (±0.002mm). Thin laminations suppress classical eddy currents proportional to the square of strip thickness, providing exceptional efficiency under harmonic-rich waveform distortion.
Environmental standards increasingly demand the elimination of hexavalent chromium compounds from electrical steel surface treatments. Next-generation oriented steel features phosphate-based, chromium-free insulation films (Class C-5 / ASTM A976 standards). These microscopic coatings deliver surface insulation resistances exceeding 100 Ω·cm²/lamination, exceptional punchability for stamped accessory shapes, and uncompromised adhesion during stress-relief annealing cycles exceeding 800°C in pure nitrogen atmospheres.
Tangshan Shouyu Electromagnetic New Materials Co., Ltd.
Tangshan Shouyu Electromagnetic New Materials Co., Ltd. was established in 2022 and is located in Yutian County Industrial Park, Tangshan City, Hebei Province. It is a high-tech enterprise specializing in the research and development, production, and sales of oriented silicon steel.
Benefiting from advanced metallurgy infrastructure and strong engineering expertise, the company specializes in cold-rolled grain-oriented silicon steel (CGO) and high-magnetic-induction grain-oriented silicon steel (Hi-B). By supplying raw material and custom slit coils to domestic and international manufacturers of power accessories, power distribution transformers, and grid electrical components, Tangshan Shouyu stands at the technological forefront of the global energy-efficiency upgrade.
Rigorous microstructural analysis, magnetic property testing, and Epstein frame verification guarantee unyielding batch-to-batch performance consistency.
Decades of industrial manufacturing excellence, structural transformation, and sustained technological investments.
After the reform and opening-up, the first-generation founders established a plastic packaging company, establishing foundational manufacturing competencies and management discipline.
In 2000, the water conservation business was launched and successfully went public under the leadership of the second-generation leadership team, marking corporate maturity.
In 2004, the company entered the steel industry, evolving from steel smelting and processing to deep processing of steel products, encompassing elevator guide rail steel, automotive spring steel, oil-quenched steel wire, and galvanized strip steel.
Started real estate development and operation business in 2010, building diversified corporate assets and extensive infrastructure development expertise.
Entering the cold chain warehousing and transportation industry in 2021, modernizing regional logistics supply chains and intelligent storage systems.
In 2022, the deep processing of steel was strategically extended into the high-end field of silicon steel, establishing Tangshan Shouyu Electromagnetic New Materials Co., Ltd.
Driving continuous value through high-permeability electromagnetic materials engineered for power grid transformation.
As a core material supplier for improving the energy efficiency of distribution transformers, relying on profound technological accumulation and innovative genes, the company focuses on the high-end electromagnetic material track. Its core product, cold-rolled oriented silicon steel, with excellent low iron loss and high magnetic induction performance, has become the core support for improving the energy efficiency of distribution transformers.
In the era of the national "dual carbon" strategy and energy-saving upgrading of the power grid, we have taken the lead in the research and development and large-scale production of low iron loss and high magnetic induction oriented silicon steel (Hi-B steel), using key material innovation to break through the energy efficiency bottleneck of power equipment and promote the deep transformation of the industry towards high efficiency and green development.
We always adhere to the business philosophy of "honesty and trustworthiness, always moving forward", guided by customer needs, driven by technological innovation, and working together with industry chain partners to promote the transformation of the energy industry towards green and efficient.
In the future, we will continue to deeply cultivate the field of electromagnetic new materials, create long-term value for customers with excellent quality and professional services, inject new momentum into the development of the industry, and become a trusted global electromagnetic new material partner.
Complete metallurgical lifecycle monitoring from surface oxide descaling to ultra-precision slitting and packaging.
Pickling Line
20 Roll Reversible Cold Rolling Mill
Decarbonization Annealing Line
Magnesium Oxide Coated Wire
High Temperature Hood Type Annealing Furnace
Stretch Flat Line
Slitting Line
Heavy-duty, high-precision manufacturing installations delivering world-class oriented silicon steel strip tolerances.
Explore our comprehensive product portfolio of high-grade oriented silicon steels, manufacturing lines, technical specifications, and end-to-end quality control solutions tailored for power accessories.