Engineered to deliver high magnetic induction and minimal core loss for demanding railway traction applications.
Modern railway transportation, particularly high-speed rail (HSR) and heavy-haul freight systems, relies heavily on continuous, stable, and highly efficient electrical power. The railway power supply network operates as the lifeline of this infrastructure, transforming high-voltage grid electricity into usable traction power. At the heart of this network are traction transformers, autotransformers, and reactors. The efficiency of these critical components is fundamentally determined by the magnetic core material used—specifically, Cold Rolled Grain-Oriented (CRGO) Silicon Steel and High Magnetic Induction (HiB) Steel.
Unlike standard power grids, railway electrification systems experience extreme load fluctuations, frequent short circuits, and harmonic distortions. Magnetic cores must withstand these dynamic stresses while maintaining minimal core losses (iron loss) and high permeability to prevent voltage drops. High-grade oriented silicon steel, with its highly aligned grain structure, provides the optimal magnetic path, reducing energy losses and heat generation inside the transformer core.
The global railway power supply industry is undergoing a massive transformation driven by urbanization, carbon neutrality mandates, and the expansion of cross-border transit links. Governments worldwide are investing billions in upgrading legacy diesel lines to electrified systems. According to industrial market reports, the demand for high-efficiency traction transformers is projected to grow substantially over the next decade. Consequently, the supply of high-grade oriented silicon steel has become a strategic priority for transformer manufacturers and railway contractors.
China, Japan, and Europe remain the primary hubs for high-performance HiB steel production. As a leading manufacturer, Tangshan Shouyu Electromagnetic New Materials Co., Ltd. is addressing this global demand by manufacturing ultra-low-loss CRGO and HiB steel grades. The commercial reality of today's market dictates that only factories with fully integrated production capabilities—spanning from advanced cold-rolling to precise tension coating and comprehensive magnetic testing—can meet the stringent quality certifications required by global railway operators like CRH, DB, SNCF, and Amtrak.
Tangshan Shouyu Electromagnetic New Materials Co., Ltd.
Tangshan Shouyu Electromagnetic New Materials Co., Ltd. was established in 2022 and is located in Yutian County Industrial Park, Tangshan City, Hebei Province. It is a high-tech enterprise specializing in the research and development, production, and sales of oriented silicon steel.




Electrified railways demand specialized power transformer configurations to handle unique operational stresses. Unlike standard commercial utility grids, railway power distribution involves highly dynamic, unbalanced loads. Here is how high-grade oriented steel performs in key application scenarios:
Traction transformers are the primary link between the national high-voltage transmission grid (typically 110kV to 220kV) and the catenary contact lines (typically 25kV or 2x25kV). These units must run continuously under heavy load cycles. Utilizing HiB (High Magnetic Induction) Silicon Steel cores allows these transformers to maintain high magnetic flux densities while lowering core losses. This reduces thermal stress inside the winding and core assemblies, directly translating to extended transformer lifespans and minimized maintenance cycles.
Modern high-speed rail lines widely adopt the AT (Autotransformer) feeding system to supply power over long distances without significant voltage drops. Autotransformers are placed at regular intervals (usually every 10 to 15 km) along the tracks. Since these units are distributed in remote locations, reliability is paramount. The use of high-permeability CGO or HiB oriented steel cores ensures that the autotransformers operate with minimal standby energy loss (no-load loss), which is critical for reducing the overall carbon footprint of the railway network.
Due to the frequent switching of locomotives and the use of power electronic converters on board modern trains, railway power systems generate significant harmonic distortions. Trackside reactors and filters are installed to stabilize the grid. The cores of these reactors require oriented silicon steel that can handle high-frequency harmonics without excessive eddy current losses. Precision-slitted CRGO steel strips are essential for assembling these custom-engineered reactor cores.
The strategic evolution of Tangshan Shouyu's industrial footprint, leading up to advanced silicon steel manufacturing.
As railway networks target higher speeds (exceeding 350 km/h) and heavier axle loads for freight, the electrical demands on the power supply infrastructure will intensify. Several key trends are shaping the future development of oriented silicon steel for this sector:
Traditional transformer cores utilize 0.27mm to 0.30mm thick steel sheets. However, to combat the high-frequency harmonics generated by modern locomotive traction converters, the industry is shifting toward thinner laminations, such as 0.23mm, 0.20mm, and even 0.18mm. Thinner sheets significantly reduce eddy current losses, allowing traction transformers to run cooler and more efficiently under high-frequency conditions.
To achieve the lowest possible core losses, manufacturers are employing domain refinement techniques, such as laser scratching or mechanical scribing. These processes refine the magnetic domain structure of the silicon steel, reducing anomalous losses by up to 10% to 15%. This technology is highly sought after for high-speed rail traction substations where every kilowatt saved contributes to lower operating costs.
HiB steel, which offers a magnetic induction ($B_8$) of 1.90 Tesla or higher, is rapidly replacing conventional grain-oriented (CGO) steel in railway projects. The higher magnetic induction allows designers to reduce the physical size and weight of traction transformers—a critical factor for on-board locomotive transformers where space and weight limitations are extremely tight.
Tangshan Shouyu's core competencies as a specialized electromagnetic material partner.
As a core material supplier for improving the energy efficiency of distribution transformers, relying on profound technological accumulation and innovative genes, the company focuses on the high-end electromagnetic material track. Its core product, cold-rolled oriented silicon steel, with excellent low iron loss and high magnetic induction performance, has become the core support for improving the energy efficiency of distribution transformers.
In the era of the national "dual carbon" strategy and energy-saving upgrading of the power grid, we have taken the lead in the research and development and large-scale production of low iron loss and high magnetic induction oriented silicon steel (Hi-B steel), using key material innovation to break through the energy efficiency bottleneck of power equipment and promote the deep transformation of the industry towards high efficiency and green development.
We always adhere to the business philosophy of "honesty and trustworthiness, always moving forward", guided by customer needs, driven by technological innovation, and working together with industry chain partners to promote the transformation of the energy industry towards green and efficient.
In the future, we will continue to deeply cultivate the field of electromagnetic new materials, create long-term value for customers with excellent quality and professional services, inject new momentum into the development of the industry, and become a trusted global electromagnetic new material partner.
Our integrated manufacturing sequence designed to produce high-performance electrical steel.

Pickling Line

20 Roll Reversible Cold Rolling Mill

Decarbonization Annealing Line

Magnesium Oxide Coated Wire

High Temp Hood Annealing Furnace

Stretch Flat Line

Slitting Line
Equipped with advanced machinery to ensure high precision and uniform quality of oriented silicon steel.
Browse our complete range of cold-rolled grain-oriented silicon steel products tested for high induction and low loss.
As global economies prioritize sustainable infrastructure, the electrification of railways stands out as a primary pathway to carbon neutrality. High-quality oriented silicon steel is no longer just a structural commodity; it is a critical technology enabler that directly impacts grid efficiency, operational safety, and energy conservation. By partner-shipping with advanced manufacturers like Tangshan Shouyu Electromagnetic New Materials Co., Ltd., global railway developers and transformer manufacturers can secure access to cutting-edge HiB and CRGO steel grades that meet the highest standards of the modern electric rail era.